Plastic Coatings Corporation Jaxsan Coating Products


Jaxsan 607

Jaxsan 607

JAXSAN 607 is premium quality weatherproofing coating based on acrylic elastomeric polymer technology. It features high film elongation, long term durability and excellent adhesion to a wide variety of substrates. The elastic nature of the polymer allows the JAXSAN 607 to adhere to and move with the expanding or contracting substrate without damage. It is permanently flexible and elastic and will not dry out, chip or crack. It is formulated specifically to withstand the rigors of exterior exposure that normally occur in a roofing situation.

JAXSAN 607 is available in White, Bright White, Light Gray and Aluminum Gray colors. White and Bright White are highly reflective and will reduce the surface temperature of dark colored substrates lowering the demand on air cooling units. Bright White contains more reflective pigments and is the product of choice when brightness is of prime importance.

Warranties may be available on JAXSAN 607 when properly applied over spray applied polyurethane foam, metal roofing panels and some forms of sheet roofing. Check with a manufacturers representative for more details.

Airless spray or roller applications are recommended to a achieve a wet film thickness of 20 to 25 mils drying to a film thickness of 12 to 15 mils. Two or more coats are recommended to achieve a total dry film thickness without runs or sags in the coating. Be sure that the preceding coat has dried thoroughly before application of the next coat of JAXSAN 607. Recommended total film thickness will range from 20 to 25 mils on thermal insulation and on hard surface roofing materials. Because elastomeric coatings wear from the exposed surface down, the thicker the coating, the longer the coating will last.

JAXSAN 607 is easy to spray with the airless equipment. It may also be applied by paint roller or paint brush. Care must be taken to avoid coating sags and mudcracking when applied in heavy coats. When thick coats are desired, use JAXSAN 600, a fibrated acrylic coating similar to JAXSAN 607 that has greater sag resistance and signifigantly better mud cracking resistance.

Jaxsan 600/601

Jaxsan 600

A premium quality acrylic latex coating for the protection and waterproofing of roofs and thermal insulation. It is designed to be used on insulated roofs and tanks, and may be applied directly over metal roofs and on aged built up roofing.


Jaxsan 602

Jaxsan 602

JAXSAN 602 is an acrylic, elastomeric coating for use over surfaces requiring a United States Department of Agriculture acceptance for incidental food contact.


SDS Info

SDS

SDS Info