Plastic Coatings Corporation Jaxsan Coating Products


Application
Guidelines
JAXSAN 602
Weather Coating

Coverage

Apply at a rate of 33 square feet per gallon to achieve a 25 mil minimum dry film thickness (theoretical D.F.T is 26.5). Always stir material well before using. Do not store in areas where temperature may drop below freezing. JAXSAN 602 will freeze at 32°F. For best results apply by airless spray or by brush (See spray equipment guide). When applying over polyurethane foam insulation, see JAXSAN 600 publication for sprayed polyurethane foam.

Drying Times

Drying Time, Interior: Approximately 3 hours to touch when 70°F and humidity is 70% (45 wet mils). Lower temperatures and or higher humidities will significantly increase drying times. Dry time estimates on a 40°F temperature will be 15 to 24 hours. Dry Times are best in temperatures above 60°F.

Precautions

Avoid prolongned and repeated contact with skin. Do not take internally. For interior applications, good ventilation is necessary. Eye protection when applying coating is recommended. If JAXSAN 602 comes in contact with eye, rinse thoroughly with clean water for at least 15 minutes. See MSDS. The material is for use by qualified personnel only, instruction in safe material use, handling and application is strongly recommended.

Hazardous Material Information System Rating

Health0         Reactivity0
Flammability0         Per. ProtectionB